Configuring the control unit

In Sweden it is required by law to connect a control unit to all cash registers to track all transactions made.

LS One can connect to the WEST INT control unit.

With the Swedish version of LS One POS installed you will not be able to operate the POS without connecting an eTax device.

Configuration

  1. To install the eTax control unit, plug the device into a USB port on your POS machine.
  2. The eTax device will install the needed drivers.
  3. In the device manager check which virtual COM port the device has created.
  4. Run the LS One POS application.
  5. Before logging in, open the menu Settings > Configure hardware and press confirm.
  6. Then log into the POS with a user that has the permissions to configure the hardware, for an example you can use the admin user.
  7. In the eTax tab of the Configure hardware profile dialog select that the eTax device is connected and select the COM port the device is connected to. (It is also possible to use the auto detect hardware operation). A new hardware profile will be made for each terminals that edits the hardware profile from the POS.
  8. Press the finish button and you will be logged into the POS

If the device is disconnected or it malfunctions you will not be able to operate the POS.